The maximum slewing diameter on the bed: Φ500mm
Rotation diameter on turret: Φ320mm
Maximum swing diameter at saddle: Φ720mm
| project | unit | specification | |
| Model | — | C6250-2000 | |
| Maximum swing diameter on the bed | mm | 500 | |
| Rotation diameter on the turret | mm | 320 | |
| Maximum swing diameter at saddle | Mm | 720 | |
| Maximum workpiece length | mm | 2000 | |
| Spindle bore diameter and shaft head type | mm | 120，C11 | |
| Spindle tip taper diameter and center taper | mm | 120, Mohs No.6 | |
| Spindle speed stages and ranges | r/min | 7.5-1000 (18 types) | |
| Longitudinal feed level and range | Range 1:1 | mm/r | 0.06-1.52 (32 types) |
| Range 16:1 | 1.6-24.3 (32 types) | ||
| Swap the gear with a microfeed range | mm/r | 0.06-0.912 | |
| The ratio of transverse feed to longitudinal feed | — | 1/2 | |
| Machine tool screw pitch | mm | 12 | |
| Thread type, range | Metric threads | mm | 1-240 (50 types) |
| Inch threads | tpi | 14-1 (26 types) | |
| Modular threads | mm | 0.5-120 (53 types) | |
| Diameter threads | tpi | 28-1 (24 types) | |
| Maximum lateral stroke of the lower turret | mm | 315 | |
| Maximum stroke of the upper turret | mm | 200 | |
| Sleeve stroke at the foot of the bed | mm | 250 | |
| Foot sleeve taper | — | Mohs No.6 | |
| The width of the guide rail of the bed and the hardness of quenching | mm | 550 RC52 | |
| Hardness of the bed rails | RC | 52 | |
| Main motor power | kW | 11 | |
| Fast motor power | kW | 1.1 | |
| Cooling pump motor power | kW | 0.9 | |
| Lathe weight | kg | About 4000 | |
| Machine profile dimensions (L×W×H) | mm | 4100×1380×1450 | |
A
Universal lathe description:
It can be used for internal and external turning, taper turning, end turning and other rotary parts turning;
Threading Imperial, Metric, Modulus, and D.P.
drilling, boring and grooving;
processing all kinds of flat and special-shaped materials;
They have through-hole spindle holes respectively, which can clamp bars with larger diameters;
This series of lathes adopts both imperial and metric systems, which is convenient for people from different countries with measurement systems;
High torsion resistance horizontal plate bed, high-quality cast iron carefully manufactured, the surface of the guide rail is precision treated by medium frequency induction quenching;
The guide rail pair composed of polymerized PTFE guide rail soft belt has good wear resistance, vibration absorption and precision retention;
The spindle adopts three support structures, with good rigidity, high precision and strong cutting force;
The speed range is wide, and a reasonable speed can be selected;
Metric and inch threads can be turned directly;
In addition to conventional turning, saddle lathes can also turn a variety of flat and special-shaped parts;
This series of lathes operates with different voltages (220V, 380V, 420V) and different frequencies (50HZ, 60HZ).
Universal lathe application:
A lathe is a machine tool that mainly uses turning tools to turn rotating workpieces. Lathe is the most important kind of cutting machine tool in metal cutting machine tools, and the lathe is the main number in the general machine manufacturing factory, which is also called the working machine. On the lathe, drills, reamers, reamers, taps, dies and knurling tools can also be used for corresponding processing. The function of the lathe is to cut various rotating surfaces of different sizes and shapes, as well as spiral surfaces.
Universal lathe standard accessories
| name | specification | quantity |
| machine tool | C6250 (plus digital display) | 1 |
| chuck | 400 four-clawed | 1 |
| chuck | 400 tri-claws | 1 |
| Disk | 500 | 1 |
| wrench | 250# | 1 |
| Chuck wrench | 14# | 1 |
| Compression wrench | 17# | 1 |
| Adjust the horn | 160# | 8 |
| Oil jugs | 5# | 1 |
| Dead tops | 1 | |
| Drill chucks | 1 | |
| Swivel center | 5# | 1 |
| Inner six wrenches set | 2.3.4.5.6.8.10 | 1 |
| Bearing steady rest | 1 | |
| With the knife holder | 1 |
必须是数字
不能为空
E-mail格式不对
手机号格式不对
不能为空
不能为空
