The maximum slewing diameter on the bed: Φ500 mm
Maximum slewing diameter in the saddle: Φ710 mm
Spindle bore diameter: Φ105 mm
Technical Scope:
| project | unit | range | ||
| CS6150C | CS6250C | |||
| Processing range | Maximum swing diameter on the bed | millimetre | Φ500 | |
| Maximum swing diameter in the saddle | millimetre | Φ710 | ||
| Effective length in the saddle | millimetre | 240 | ||
| Maximum swing diameter on the saddle | millimetre | Φ300 | ||
| Maximum workpiece length | millimetre | 1000/1500/2000/3000 | ||
| Bed width | millimetre | 390 | ||
| spindle | Spindle bore diameter | millimetre | Φ105 | |
| Spindle head type | ISO 702/II. No.8 Cam Locking Type | |||
| Spindle speed | Revolutions/min | Level 12 32-1600 | ||
| Spindle motor power | kw | 7.5 | ||
| Tailstock | Sleeve diameter/stroke | millimetre | φ75/150 | |
| Tip taper | MT | 5 | ||
| Knife | Number of tools/ | 4/25X25 | ||
| Knife square size | ||||
| Feed and thread | Maximum stroke of the upper turret | millimetre | 145 | |
| Maximum stroke of the lower turret | m/min | 320 | ||
| X-axis feed | mm/rev | 65 species 0.027-1.07 | ||
| Z-axis feed | mm/rev | 65 species 0.063-2.52 | ||
| Metric threads | millimetre | 22 species 1-14 | ||
| Inch threads | tpi | 25 species 28-2 | ||
| Module threads | π mm | 18 types 0.5-7 | ||
| Diameter threads | DP | 24 species 56-4 | ||
| other | Coolant pump motor | kw | 0.06 | |
| The length of the machine | millimetre | 2632/3132/3632/4632 | ||
| The width of the machine | millimetre | 975 | ||
| The height of the machine | millimetre | 1270 | ||
| Machine weight | kg | 2100/2300/2500/2900 | ||
Product Introduction:
1. It can be used for internal and external turning, taper turning, face turning and other rotary parts turning;
2. Turning all kinds of commonly used metric, imperial, modulus, and diameter threads;
3. Carry out drilling, reaming and oil pulling grooves, etc.;
4. It can also turn all kinds of flat and special-shaped parts;
5. Respectively with through-hole spindle holes, which can accommodate bars with larger diameters;
6. With metric or imperial feed system, suitable for regions and countries with different length measurement units;
7. There are handbrakes and foot brakes for users to choose;
8. Electrical system with different voltages (220V, 380V, 420V) and different frequencies (50Hz, 60Hz).
Standard configuration
Three-jaw chucks and flanges
Four-jaw chucks and flanges (for CS6250C)
Four-station turret
Dial
Faceplate (for CS6250C)
Steady rest
Heel Turret
LED Work Light
Full-length bezel
Dead Centers and Centers Sets
Wrenches
Hook Wrenches
Fuel Guns
Optional Equipment
Live Centers
Random Buckle Disc
Mechanical Collision Stops
Quick Change Turret (American/Italian/European)
Chuck Protection
Turret protection,
taper die,
two-axis/three-axis digital display
必须是数字
不能为空
E-mail格式不对
手机号格式不对
不能为空
不能为空
