The maximum slewing diameter on the bed: Φ800 mm
Maximum slewing diameter in the saddle: Φ1000 mm
Spindle bore diameter: Φ105 mm
Technical Parameters:
| project | unit | range | |
| CQ6280C | |||
| Processing range | Maximum swing diameter on the bed | millimetre | Φ800 |
| Maximum swing diameter in the saddle | millimetre | Φ1000 | |
| Effective length in the saddle | millimetre | 240 | |
| Maximum swing diameter on the saddle | millimetre | Φ560 | |
| Maximum workpiece length | millimetre | 2000/3000 | |
| spindle | Spindle bore diameter | millimetre | Φ105 |
| Spindle head type | ISO 702/II. No.8 Cam Locking Type | ||
| Spindle speed | Revolutions/min | Level 12 30-1400 | |
| Spindle motor power | kw | 7.5 | |
| Tailstock | Sleeve diameter/stroke | millimetre | Φ90/150 |
| Tip taper | MT | 5 | |
| Knife | Number of tool positions/tool size | 4/25X25 | |
| Feed and thread | X-axis maximum travel | millimetre | 145 |
| Maximum Z-axis travel | m/min | 320 | |
| X-axis feed | mm/rev | 65 species 0.063-2.52 | |
| Z-axis feed | mm/rev | 65 species 0.027-1.07 | |
| Metric thread range | millimetre | 22 species 1-14 | |
| Inch thread range | tpi | 25 species 28-2 | |
| Modular thread range | π mm | 18 types 0.5-7 | |
| Thread range of the diameter joint | tpi π | 24 species 56-4 | |
| other | Cooling pump motor power | kw | 0.06 |
| The length of the machine | millimetre | 3365/4365 | |
| The width of the machine | millimetre | 1340 | |
| The height of the machine | millimetre | 1490 | |
| Machine weight | kg | 3300/3700 | |
Product Introduction:
1. It can be used for internal and external turning, taper turning, face turning and other rotary parts turning;
2. Turning all kinds of commonly used metric, imperial, modulus, and diameter threads;
3. Carry out drilling, reaming and oil pulling grooves, etc.;
4. It can also turn all kinds of flat and special-shaped parts;
5. Respectively with through-hole spindle holes, which can accommodate bars with larger diameters;
6. With metric or imperial feed system, suitable for regions and countries with different length measurement units;
7. There are handbrakes and foot brakes for users to choose;
8. Electrical system with different voltages (220V, 380V, 420V) and different frequencies (50Hz, 60Hz).
Standard configuration
Three-jaw chuck and flange
Four-jaw chucks and flanges (for CQ6280C)
Four-station tool holder
Dial
Flower Tray (for CQ6280C)
Steady rest
With the knife holder
LED work lights
Full-length bezel
Dead top and top set
wrench
Hook wrench
Oil gun
Optional equipment
Live tops
Random buckle plate
Mechanical stops
Quick change turret (American/Italian/European)
Chuck protection
Knife holder protection
Taper die
Two-axis/three-axis digital display
必须是数字
不能为空
E-mail格式不对
手机号格式不对
不能为空
不能为空
