Z3132摇臂钻床

Product Description:

Z31 universal radial drilling machine is a universal radial drilling machine that can carry out 360-degree multi-direction and multi-angle machining. The structure of the Z31 universal radial drilling machine is that the headstock is sleeved on the column, and one end of the headstock is connected to the rocker arm by a disc. The headstock and rocker arm are interlocked by two disc grooves and then bolted with a T-bolt. There is an angled dial around the outer circumference of the rocker disc, and the gearbox transmits power through the smooth rod. Give the headstock and then transfer the power to the spindle for operation. The spindle of the Z31 universal radial drilling machine can also rotate 360 degrees parallel to the rocker arm. By turning between the parts, the machine can work at any angle and in the plane. In order to better adjust the levelness and stability of the machine base, it is equipped with adjustment bolts, which can flexibly and conveniently solve the correction of uneven ground and the levelness of the machine tool.

Features:

● The guide rail, column and box of Z31 universal radial drilling machine are made of high-strength cast iron. The castings are heat-treated after casting to eliminate the internal stresses of the castings. Castings that have been heat-treated to relieve internal stress can maintain the stability of the machine body, column surface and guide rail for a long time. Each contact surface is quenched to maintain the hardness of the guide rail and column, and the machine tool can maintain accuracy and durability for a long time;

● The electrical and motor of Z310 radial drilling machine adopt the national standard grade. National standard electrical control, machine tools are more energy-saving and safer to operate;

● The rotating gears of the headstock are precision ground and carburized and quenched. The gearbox has low operating noise and good transmission force;

● The bearings of each rolling part are made of domestic Harbin bearings, and the whole machine can be cut at high speed;

● The spindle box adopts automatic oil supply system for internal circulation lubrication, and the gears and bearings are fully lubricated, which solves the shortcomings of insufficient lubrication of the top gear of the traditional lubrication method;

● The spindle is equipped with a travel protection switch, which solves the problem of damaging the spindle or gear when the spindle is fed to the top when the worker misoperates or is automatically fed;

● The switch of the column safety locking device can automatically cut off the power supply when the worker forgets to loosen the locking device, which can well protect the column from being strained and the turbine and worm from slipping;

● The screw rod is produced and processed in strict accordance with the screw processing technology such as quenching and tempering and quenching. The screw rod produced by the special screw processing equipment is precision ground by the grinding machine, and the service life is twice that of the ordinary screw rod. The nut is a brass nut, with good wear resistance and high precision;

● Z31 universal radial drilling machine has undergone strict product quality and accuracy screening from blank casting, parts procurement, and supplier selection. Each process is strictly inspected to ensure the overall accuracy requirements of the machine tool when it leaves the factory.

Standard equipment

Radial drilling machine
deceleration sleeve
unsleeve, wedge
drill chuck
workbench
unloader, wrench
anchor bolt
LED work light
adjustment pad
operation manual
certificate
Packing list