Wire-Cut EDM

DK7745 Wire-Cut EDM

A precision wire-cut EDM for profile cutting, punch and die work, hardened steel, carbide, and small-batch parts. The reference configuration combines 450 x 550 mm X/Y travel, a 570 x 810 mm worktable, and a 600 kg maximum load for flexible 2D contour machining.

450 x 550 mmX / Y Travel
570 x 810 mmWorktable
600 kgMaximum Load
7,000 mm2/hOne-Pass Speed

Suitable Workpieces and Cut Geometry

Is DK7745 Right for Your Parts?

DK7745 is intended for precision wire-cut EDM work where the part profile, material, thickness, taper, and required surface finish are more important than turning diameter or milling capacity.

DK7745 punch and die profile photo

Punches, Dies, and Inserts

For tool-steel and carbide profiles, stamping dies, punches, inserts, and replacement components that require accurate internal and external contours.

DK7745 precision component photo

Precision Plates and Small Components

For plates, templates, nozzles, gears, slots, and small-batch parts with narrow slots, fine radii, or complex 2D outlines.

DK7745 taper cutting photo

Tapered and Hardened Workpieces

For hardened steel, carbide, and tapered profiles when wire travel, flushing, thickness, and the requested taper angle can be confirmed.

Good Initial Fit

  • X/Y travel requirement is within 450 x 550 mm.
  • Workpiece fits the 570 x 810 mm table and stays within the 600 kg load limit.
  • Profile cutting, narrow slots, internal corners, or hardened material are required.
  • Wire diameter, taper angle, thickness, and surface finish can be defined from the drawing.

Review Another Configuration

  • Required travel or load exceeds the DK7745 working envelope.
  • Very thick workpieces need a higher Z configuration or special flushing plan.
  • Production target depends on the optional high-speed cabinet or 10,000+ mm2/h output.
  • Critical tolerance or finish requires a sample cut and acceptance criteria.

For configuration review, provide the drawing, material and hardness, blank size, thickness, taper requirement, critical tolerances, surface finish, batch size, destination, and electrical standard.

Machine Features

Why DK7745 May Fit the Cut

The reference configuration links travel, table capacity, wire control, taper capability, and electrical design to practical wire-cut EDM work. Final performance depends on the drawing, material, flushing, and acceptance conditions.

DK7745 precision feed system image

450 x 550 mm X/Y Travel

The travel envelope supports medium-size punch, die, plate, and profile work while keeping the part within a clearly defined cutting area.

DK7745 worktable and tank image

570 x 810 mm Table for Flexible Setup

The table gives room for fixtures and irregular workpieces. Confirm fixture height, immersion arrangement, and access around the cutting zone.

DK7745 wire cutting control image

Variable Wire Travel and 5 A Current

Wire travel is 0-12 m/s with variable frequency control, and maximum current is 5 A. Cutting conditions must be matched to wire, material, thickness, and finish.

DK7745 taper cutting example image

Multi-Angle Taper Capability

Reference taper entries include 3, 6, 15, 30, and 45 degrees. Confirm actual geometry, thickness, and control strategy before order.

DK7745 control cabinet image

7,000 mm2/h Reference Speed

One-pass comprehensive speed is listed at 7,000 mm2/h, with an optional high-speed cabinet capable of 10,000+ mm2/h subject to material and process conditions.

DK7745 machine frame image

Stable 600 kg Workpiece Capacity

The machine is rated for a maximum load of 600 kg. Workholding, part support, and cutting height must be reviewed for heavy or tall workpieces.

Machine Data

Complete Technical Specifications

The following values are the DK7745 reference data from the supplied machine manual. Final configuration, electrical standard, and acceptance values should be confirmed in the technical agreement.

DK7745 technical specification diagram
DK7745 technical specification diagram
ParameterReference value
X / Y travel450 x 550 mm
Worktable570 x 810 mm
Z-axis travel500 mm
Maximum load600 kg
Step accuracy0.015 / 350 mm
Machining accuracy+/-0.015 mm
One-pass roughnessRa <= 2.5 um
One-pass comprehensive speed7,000 mm2/h
Optional high-speed cabinetUp to 10,000+ mm2/h, subject to process conditions
Maximum current5 A
Wire diameter0.12-0.2 mm; recommended 0.18 mm molybdenum wire
Wire travel0-12 m/s, variable frequency
Taper entries3, 6, 15, 30, and 45 degrees; confirm geometry
Input220 V AC +/-10%, 50-60 Hz
Design / rated total power2 / 1 kVA
Net weight1,200 kg
Overall dimensions1,700 x 1,240 x 1,650 mm
StandardGB/T 7926-2015
CertificationEU CE / ISO9001 listed
Warranty and serviceOne-year warranty; lifetime maintenance listed

Maximum machining thickness is configurable for increased height and must be confirmed with the part drawing, flushing plan, wire condition, and acceptance requirement.

Model Fit

Quick Selection Guide

Use the part envelope, material, thickness, taper, accuracy, surface finish, and production target to decide whether DK7745 is the right starting configuration.

DK7745 quick selection guide diagram
DK7745 quick selection guide diagram
Customer requirementRecommended directionReasonNext step
Profile cutting for punches, dies, inserts, or platesDK7745450 x 550 mm travel and 500 mm Z travel cover a broad medium-size wire-cut range.Send drawing and material hardness.
Heavy fixture or workpieceDK7745 after load reviewMaximum table load is 600 kg; support and clamping must be checked.Provide weight, center of gravity, and fixture plan.
Fine finish or tight toleranceDK7745 with sample cutReference accuracy is +/-0.015 mm and one-pass roughness is Ra <= 2.5 um.Define acceptance sample and finish target.
High throughput targetHigh-speed cabinet optionReference speed is 7,000 mm2/h; optional cabinet can reach 10,000+ mm2/h subject to conditions.Provide material, thickness, and cycle target.
Tapered profileDK7745 after geometry review3, 6, 15, 30, and 45 degree taper entries are listed; actual geometry must be confirmed.Send taper angle, height, and profile drawing.

For an engineering review, provide the drawing, material, blank dimensions, thickness, critical tolerances, surface finish, batch size, destination, and electrical standard.

Selection Comparison

Which Wire-Cut EDM Configuration Fits?

DK7745 is a medium-size reference configuration. The final choice should follow travel, load, thickness, taper, finish, and production requirements.

DK7735 DK7745 DK7755 wire-cut EDM comparison
DK7735 / DK7745 / DK7755 wire-cut EDM comparison
Comparison itemDK7735DK7745DK7755
Typical roleSmaller profile and insert workMedium-size punch, die, plate, and profile workLarger envelope or heavier workpiece requirements
Selection focusCompact setup and lower workpiece envelope450 x 550 mm travel, 570 x 810 mm table, 600 kg loadConfirm larger travel, load, and configuration with supplier
Best starting pointPart fits smaller machine and cycle target is moderatePart needs the stated DK7745 envelope and reference speedPart exceeds DK7745 travel, thickness, or load capacity
Next stepCompare drawing and fixture sizeSend drawing, material, taper, finish, and cycle targetRequest an engineered model comparison

Quality Documentation

Company Certificates

Common Questions

DK7745 Wire-Cut EDM FAQ

What workpieces are suitable for DK7745?

Punches, dies, inserts, plates, nozzles, gears, slots, and other parts requiring accurate wire-cut profiles are typical starting applications.

What are the main working dimensions?

X/Y travel is 450 x 550 mm, Z-axis travel is 500 mm, and the reference worktable is 570 x 810 mm.

What is the maximum workpiece load?

The manual lists a maximum load of 600 kg. Fixture weight, support, and workpiece center of gravity must be checked before final configuration.

What wire and wire speed are specified?

Wire diameter is 0.12-0.2 mm, with 0.18 mm molybdenum wire recommended. Wire travel is 0-12 m/s with variable frequency control.

Can DK7745 cut tapered profiles?

Reference taper entries include 3, 6, 15, 30, and 45 degrees. The actual angle, workpiece height, and profile must be confirmed from the drawing.

What speed and surface finish should we expect?

One-pass comprehensive speed is listed at 7,000 mm2/h and one-pass roughness at Ra <= 2.5 um. Material, thickness, wire condition, flushing, and acceptance criteria affect the result.

Can the machine be supplied for different electrical standards?

The reference input is 220 V AC +/-10%, 50-60 Hz. Destination voltage, frequency, and electrical requirements should be stated in the quotation.

What information is needed for a quotation?

Send the part drawing, material and hardness, blank dimensions, thickness, taper, critical tolerance, finish, batch size, destination, and electrical standard.