Technical Parameters:
|
Model
parameter |
XKW2642x100(XKW2650x100) | XKW2642x120(XKW2650x120) | XKW2642x140(XKW2650x140) | XKW2642x160(XKW2650x160) | XKW2642x180(XKW2650x180) | XKW2642x200(XKW2650x200) |
| Processing range | ||||||
| Effective width of gantry(mm) | 4200(5000) | |||||
| X-axis travel (mm) | 10800 | 12800 | 14800 | 16800 | 18800 | 20800 |
| Y-axis travel (mm) | 4600(5000) | |||||
| Z-axis travel (mm) | 1250/1500 | |||||
| Spindle face to table (mm) | 250~1500/1750 | |||||
| workbench | ||||||
| Table Size (WxL) (mm) | 3000×10000(4000×10000) | 3000×12000(4000×12000) | 3000×14000(4000×14000) | 3000×16000(4000×16000) | 3000×18000(4000×18000) | 3000×20000(4000×20000) |
| Table load bearing (t) | 10 | |||||
| Table T-slot (size x spacing) | 36×250 | |||||
| spindle | ||||||
| Ram form/cross-section size (mm) |
Square ram
450×450 |
|||||
| Maximum spindle speed (rpm) | 3500 | |||||
| Spindle power(kw) | 22/26(30/37) | |||||
| Spindle transmission form | Direct connection + ZF two-speed gearbox | |||||
| Spindle taper | BT5O | |||||
| Tool magazine (option) | ||||||
| Tool magazine capacity(T) | 24/32/40/60 | |||||
| Max. tool diameter (mm) | Φ125 /230 | |||||
| Max. tool length (mm) | 300 | |||||
| Maximum tool weight (mm) | 15 | |||||
| other | ||||||
| Total Power Capacity (KVA) | 100 | |||||
| Machine weight (T) | 125 (140) | 140 (160) | 155 (180) | 170 (200) | 185 (220) | 200 (240) |
| Machine size(mm) |
17000x8000x6800
（17000x9000x6800） |
19000x8000x6800
（19000x9000x6800） |
21000x8000x6800
（21000x9000x6800） |
23000x8000x6800
（23000x9000x6800） |
25000x8000x6800
（25000x9000x6800） |
27000x8000x6800
（27000x9000x6800） |
| Numerical control system | Siemens 828D | Siemens 828D | Siemens 828D | Fanuc Oi-MF | Siemens 828D | Siemens 828D |
| FANUCOi-MF | FANUC0i-MF | FANUC0i-MF | FANUC0i-MF | FANUC0i-MF | FANUC0i-MF | |
Features:
German technology!
Single-sided double rack and pinion electronic clearance, high synchronization accuracy of gantry movement!
The spindle speed change adopts a combination of ZF gearbox and self-made gearbox to improve the output torque of the spindle of the machine tool, which is suitable for heavy-duty machining.
The square ram has a cross-section of 450mm x 450mm/500mm x 500mm, driven by double servo motors, with a stroke of 1500mm/2000mm, good rigidity, and can be re-cut with the heavy-duty spindle unit.
必须是数字
不能为空
E-mail格式不对
手机号格式不对
不能为空
不能为空
