Technical Parameters:
| project | unit | IG150 | IG150-I |
| Grindable bore diameter range | millimetre | Φ6-150 | Φ6-200 |
| Maximum depth of grinding | millimetre | 150 (Maximum grinding depth of one-piece spindle: 300mm) |
200 |
| Bed swivel diameter | millimetre | 520 | 520 |
| The maximum outer contour diameter of the grinding workpiece | millimetre | 320 | 320 |
| The maximum moving stroke of the table | millimetre | 540 | 540 |
| Table spindle speed | rotate speed | 0~3000 | 0~3000 |
| Headstock slide feed rate | m/min | 8 | 8 |
| X-axis feed rate | m/min | 8 | 8 |
| X-axis minimum feed resolution | millimetre | 0.001 | 0.001 |
| Z-axis minimum feed resolution | millimetre | 0.001 | 0.001 |
| Headbox rotation angle | 15° Forward 2" Backward | 15° Forward 2" Backward | |
| Spindle drive method | Servo motor | Servo motor | |
| Grinding wheel spindle motor | 2HP | 2 (three-phase motor) | 2 (three-phase motor) |
| X-axis servo motor | kw | 1.5 (1 axis) | 1.5 (1 axis) |
| Z-axis servo motor | kw | 2.0 | 2.0 |
| Machine size (L*W*H) | millimetre | 2500LX2100W | 2500LX2100W |
| Total weight (approx. gross weight) | kg | 3000 | 3200 |
Product Description :
● The body design is ergonomically designed and easy to operate
● Compact internal cylindrical grinder, small installation space, suitable for any workshop
● The sliding surface adopts hydrostatic automatic lubrication system, which has stable movement and good wear resistance.
● Automatic grinding: rough grinding, dressing, fine grinding, spark grinding cycle action. High precision, easy to operate, greatly improve the production capacity. It is suitable for mass production and grinding of a small number of workpieces of different shapes.
● P4 high-precision spindle bearing is used for the rotation of the headstock, which has high precision, good rigidity and quiet operation.
● The feed shaft adopts precision ball screw, which is driven by servo motor, which can realize segmentless feed.
● The dressing method is CNC automatic correction and dressing
(1) If you use a diamond or CBN grinding wheel, you can choose not to correct the dressing method.
(2) For difficult-to-wear workpieces, a variety of correction methods can be selected to ensure the best processing quality.
● In mass production, automatic production equipment such as automatic feeding and unloading can be configured.
Standard equipment
1.Grinding and cooling device (water tank/water pump/water pipe) (1 set)
2.Diamond knife pen (1 piece)
3.Angle adjustment table (1 piece)
4.Tool box and tool box (hex wrench set/open end wrench/screwdriver) (1 set)
5.Spindle grinding wheel adapter (3 pieces).
6. High-speed grinding spindle (1 piece)
7. Basic adjustment block (6 pieces)
Optional Equipment
1.Hydraulic Three-Jaw Chuck
2.Chuck Flange
3.Mechanical Spindle: 10,000/20,000/30,000rpm
4.Motor Spindle: 40,000/100,000rpm
5. End Face Detection Device
6. Paper tape filter
7. Fully enclosed cover plate and automatic door
8. Automatic measuring device for inner diameter
必须是数字
不能为空
E-mail格式不对
手机号格式不对
不能为空
不能为空
