Grinding diameter : 6-200 mm
Technical Parameters:
| project | unit | IG150 | IG150-I |
| Grindable bore diameter range | millimetre | Φ6-150 | Φ6-200 |
| Maximum depth of grinding | millimetre | 150 (Maximum grinding depth of one-piece spindle: 300mm) |
200 |
| Bed swivel diameter | millimetre | 520 | 520 |
| The maximum outer contour diameter of the grinding workpiece | millimetre | 320 | 320 |
| The maximum moving stroke of the table | millimetre | 540 | 540 |
| Table spindle speed | rotate speed | 0~3000 | 0~3000 |
| Headstock slide feed rate | m/min | 8 | 8 |
| X-axis feed rate | m/min | 8 | 8 |
| X-axis minimum feed resolution | millimetre | 0.001 | 0.001 |
| Z-axis minimum feed resolution | millimetre | 0.001 | 0.001 |
| Headbox rotation angle | 15° Forward 2" Backward | 15° Forward 2" Backward | |
| Spindle drive method | Servo motor | Servo motor | |
| Grinding wheel spindle motor | 2HP | 2 (three-phase motor) | 2 (three-phase motor) |
| X-axis servo motor | kw | 1.5 (1 axis) | 1.5 (1 axis) |
| Z-axis servo motor | kw | 2.0 | 2.0 |
| Machine size (L*W*H) | millimetre | 2500LX2100W | 2500LX2100W |
| Total weight (approx. gross weight) | kg | 3000 | 3200 |
Product Description :
● The body design is ergonomically designed and easy to operate
● Compact internal cylindrical grinder, small installation space, suitable for any workshop
● The sliding surface adopts hydrostatic automatic lubrication system, which has stable movement and good wear resistance.
● Automatic grinding: rough grinding, dressing, fine grinding, spark grinding cycle action. High precision, easy to operate, greatly improve the production capacity. It is suitable for mass production and grinding of a small number of workpieces of different shapes.
● P4 high-precision spindle bearing is used for the rotation of the headstock, which has high precision, good rigidity and quiet operation.
● The feed shaft adopts precision ball screw, which is driven by servo motor, which can realize segmentless feed.
● The dressing method is CNC automatic correction and dressing
(1) If you use a diamond or CBN grinding wheel, you can choose not to correct the dressing method.
(2) For difficult-to-wear workpieces, a variety of correction methods can be selected to ensure the best processing quality.
● In mass production, automatic production equipment such as automatic feeding and unloading can be configured.
Standard equipment
1.Grinding and cooling device (water tank/water pump/water pipe) (1 set)
2.Diamond knife pen (1 piece)
3.Angle adjustment table (1 piece)
4.Tool box and tool box (hex wrench set/open end wrench/screwdriver) (1 set)
5.Spindle grinding wheel adapter (3 pieces).
6. High-speed grinding spindle (1 piece)
7. Basic adjustment block (6 pieces)
Optional Equipment
1.Hydraulic Three-Jaw Chuck
2.Chuck Flange
3.Mechanical Spindle: 10,000/20,000/30,000rpm
4.Motor Spindle: 40,000/100,000rpm
5. End Face Detection Device
6. Paper tape filter
7. Fully enclosed cover plate and automatic door
8. Automatic measuring device for inner diameter
Plsease input value
Plsease input value
