Technical Parameters:
| Technical parameters of TK6511/TK6513 CNC gantry planer milling and boring machine | ||||
| project | parameter | TK6511 | TK 651 1B | TK6513 |
| spindle | Spindle diameter | φ110 mm | φ110 mm | φ130 mm |
| Spindle taper | Sensitivity 50 | Sensitivity 50 | Sensitivity 50 | |
| Spindle speed | 20-1000r/min | 20-1000r/min | 20-950r/min | |
| Maximum spindle torque | 447 Nm | 447 Nm | 680 Nm | |
| Maximum spindle torque | 18000 Newtons | 18000 Newtons | 20,000 Newtons | |
| Main motor power | 15 kilowatts | 15 kilowatts | 16 kilowatts | |
| Spindle reduction type | Direct drive | Direct drive | Direct drive | |
|
Itinerary and
Feed rate |
Table transverse travel: X-axis | 1400 mm | 1800 mm | 2000 mm |
| Headstock vertical travel: Y-axis | 900 mm | 1200 mm | 1700 mm | |
| The column travels longitudinally in the Z-axis | 700 mm | 700 mm | 900 mm | |
| Axial travel of boring shaft (W) | 600 mm | 600 mm | 800 mm | |
| X/Y/Z axis movement speed | 1-5500 mm/min | 1-5500 mm/min | 1-8000 mm/min | |
| workbench | Table size | 900*1200mm | 900*1300 mm | 1400*1600 mm |
| The maximum load capacity of the workbench | 5000 kg | 5000 kg | 10000 kg | |
| Table rotation mode | 360° rotation / 4*90° positioning | |||
| precision | Positioning accuracy (X/Y/Z) | 0.04 / 0.032 / 0.032 mm | 0.04 / 0.04 / 0.032 mm | |
| Repeatability (X/Y/Z) | 0.02 / 0.018 / 0.018 mm | 0.02 / 0.02 / 0.018 mm | ||
|
system
|
Numerical control system | Central China CNC system | ||
| Machine dimensions | 3500*4200*3100 mm | 4000*4200*3600 mm | 4800*5000*4800 mm | |
| Machine weight (approx.) | 10000 kg | 12000 kg | 19000 kg | |
Product Details
TK65 series gantry milling and boring machine is T-shaped moving column type, side-mounted headstock structure: the bed is an integral T-shaped type. The workbench moves laterally along the front bed for the X axis, the column is fixed on the slide, the slide moves longitudinally along the rear bed guide rail for the Z axis, the spindle box moves along the vertical direction of the column guide rail for the Y axis, and the boring axis moves axially for the W axis.
The overall structure design of the machine tool adopts FEM finite element analysis to carry out reasonable reinforcement layout, so as to ensure that it has high rigidity and stability.
All the basic large parts are made of high-quality gray cast iron, resin sand casting process, and twice aged.
peculiarity
1. The main transmission system adopts CNC direct drive near-zero transmission technology, with few transmission parts and high transmission accuracy. The high-torque AC servo motor directly drives the spindle, with low energy consumption, low noise, low failure rate and easy maintenance. The spindle has a large speed regulation range and a large torque output;
2. The patented technology of short cylindrical rolling rotary workbench significantly improves the support capacity and reliability of the workbench;
3. The servo feeding devices of each coordinate axis are all driven by AC servo motors, and are supported by preloaded ball screws and special angular contact group bearings;
4. The headstock adopts nitrogen balance system, which is more stable, reliable and safe;
5. The built-in patented technology of the drag chain can effectively protect the pipeline operation system, reduce the failure rate, and improve the overall aesthetics.
Standard equipment
1.CNC system (Central China system)
2.Spindle
3.Spindle bearing
4. Leadscrew linear guideway
5. Mainelectrical components
6. Bedfoundation large parts
7. CNCelectric cabinet, industrial air conditioner
8.Timing and quantitative lubrication pump
Optional system
Siemens/FANUC CNC system
必须是数字
不能为空
E-mail格式不对
手机号格式不对
不能为空
不能为空
