Maximum slewing diameter: Φ1500mm
Maximum turning diameter: Φ1250mm
Technical Parameters:
| description | unit | specification | |
| Processing range | Table diameter | Millimeters (inches) | Φ1000(39.370) |
| Maximum swing diameter | Millimeters (inches) | Φ1500(59.055) | |
| Maximum turning diameter | Millimeters (inches) | Φ1250(49.212) | |
| Maximum turning length | Millimeters (inches) | 600(23.62) | |
| Maximum workpiece weight | Kilograms (lbs) | 3500(7718) | |
| workbench | Table speed | Revolutions per minute (rpm) | 2-400 |
| Table maximum torque | Nautical miles (ft-nautical miles) | 9500(7005.89) | |
| Main motor power (continuous/30 min) | kW (hp) | 30(40.8)/37(50.32) | |
| Feed | X-direction travel distance | Millimeters (inches) | 1300(58.181) |
| Ram (Z-direction) travel distance | Millimeters (inches) | 600(23.62) | |
| Fast travel speed X/Z | Millimeters per minute (IPM) | 10(393.7)/10(393.7) | |
| Servo motor torque X/Z | Nm (cubic meter-cubic meter) | 30(22.12)/22(16.22) | |
| Servo motor power X/Z | kW (hp) | 7.0(9.52)/4.0(5.44) | |
| Ball screw diameter X/Z | millimetre | Φ63 /Φ50 | |
| Knife | Number of knife positions | 12 | |
| Tool size (turning/boring) | Millimeters (inches) | 32X32(25X25,Φ50) | |
| other | power supply | kVA | 75 |
| Volume (length×width×height) | Millimeters (inches) | 4950(194.9)X3020(118.9)X4200(165.4) | |
| Total weight | Kilograms (lbs) | 18500(40,793) | |
Features:
1) The base, column and beam are made of high-strength cast iron, which has good shock absorption; Large-span hardened guide rails, and pasting, scraping process, good wear resistance, low friction resistance, long-term accuracy retention.
2) Symmetrical box-type structure, high rigidity, can carry large torque and heavy cutting, hydraulic chuck configuration is convenient and reliable for clamping workpieces.
3) Square ram structure, high rigidity, good precision, obvious advantages in processing deep holes.
4) High-power and high-torque AC spindle motor, equipped with two-stage gearbox, can output large torque, and can run at high speed to meet different processing needs.
5) Fixed beam, good rigidity and high precision.
6) Equipped with oil cooler, so that the main drive system has good lubrication and cooling, to ensure the accuracy and life of the machine tool.
7) 12-station tool magazine, large tool capacity, fast and reliable tool change.
Plsease input value
Plsease input value
