It is used to process the spherical surface of shafts, discs and shell parts of various metals, non-ferrous metals and non-metallic materials.
| Main parameters | Unit | CKA6185; CKW6185/CKA61100; CKW61100 | CKW61100E/125E/140E | CKW61125F/140F/160F |
| The spindle center is high | mm | 405/505 | 510/635/715 | 635/715/805 |
| Maximum swing diameter on the bed | mm | 850/1000 | 1000/1250/1400 | 1250/1400/1600 |
| Maximum swing diameter on the turret | mm | 510/710 | 650/900/1060 | 900/1060/1240 |
| Maximum workpiece length L | mm | 1000~8000 | 1500~8000 | 1500-8000 |
| Maximum turning length | mm | L-250 | L-250 | L-250 |
| The maximum weight of the workpiece between the centers | kg | 4000 | 60008000 | 800010000 |
| Bed width | mm | 600 | 755 | 970 |
| Spindle end code | mm | A2-11 | A2-15 | A2-15 |
| Diameter of the front bearing of the spindle | 160 | 200 | 200220 | |
| Spindle taper | Metic No.120 | Metric No.140 | Metric No.140 | |
| Spindle bore diameter | mm | 100 | 130 | 130、100 |
| The number of spindle speed stages | Automatic 4 gears stepless | Automatic 4 gears stepless | Automatic 4 gears stepless | |
| Spindle speed range | rpm | 5~800/4~500 | 4~630/4～400 | 4~630/4～400 |
| Main motor power | kW | AC15/AC22 | AC22/30~40(Spindle motor) | AC22/30~40(Spindle motor) |
| Longitudinal servo motor torque | Nm | 22/38 | 41 | 41 |
| Transverse servo motor torque | Nm | 12/30 | 41 | 41 |
| Cross-section of the shank | mmxmm | 32×32 | 45x45 | 45x45 |
| Number of tool holder stations | Vertical 4 / Horizontal 8, 12 | Vertical 4 / Horizontal 8, 12 | Vertical 4 / Horizontal 8, 12 | |
| Repeatability of the tool holder | 2 | 2 | 2 | |
| Cross skateboard stroke | mm | 550 | 510/650/740 | 650/740/850 |
| Longitudinal feed rate | mm/mn | 1~2000 | 1~2000 | 1~2000 |
| Transverse feed rate | mm/mn | 1～2000 | 1～2000 | 1~2000 |
| Vertical and horizontal rapid traverse speed | mm/min | X:6000/z; 4000 | x:6000/z; 4000 | x:6000/z; 4000 |
| Tailstock sleeve diameter | mm | 120 | 160200 | 200 |
| Tailstock sleeve stroke | mm | 250 | 300 | 300 |
| Tailstock sleeve taper | Mohs 6 | Metric 80 Mohs 6 | Mohs 6 | |
| Optional Accessories (Steady Rest) | mm | φ40~φ350 | Φ50~φ470 φ50~φ590 |
φ50~φ470; φ50~φ590 φ260~φ900 |
| Optional Accessories (Tool Holder) | mm | φ30~φ120 | φ50~φ220 | φ50~φ220 |
| 3 m model weight | kg | 6800/7200 | 12000/12500/13600 | 13000/14000/15000 |
| Weight is added per meter | kg | 800 | 1000 | 1200 |
Product Description :
This series of CNC horizontal lathes are suitable for processing all kinds of metals, non-ferrous metals and non-metallic materials of shafts, discs, shell parts of the outer circle, outer curved surface, inner hole, end face, hole and cone, spherical rough turning, semi-finishing turning, fine turning and curved surface, various R arc processing, threading, etc., through CNC programming, can automatically complete the internal and external cylindrical surface, internal and external conical surface, end face, step roughing, fine turning and internal and external threads, tapered threads, multi-head threads, metric inch threads rough, finishing.
The bed is made of high-quality gray cast iron (HT300) resin sand molding, which is quenched and ground by medium frequency. The hardness of the guide rail is higher than that of HRC52-58, the moving guide rail pair is pasted with a crawling PTFE soft belt, and the chip removal method is 45° rear chip removal. The main drive system is driven by the main motor, and the motor and the transmission mechanism are connected by a narrow V-belt. The spindle is equipped with an encoder, which realizes constant linear speed cutting and feed per revolution control and thread turning. The spindle has any threading function. Tool holders, ball screws, bearings, centralized lubrication, etc. are all well-known brands at home and abroad to ensure the machining accuracy and rigidity of the machine tool.
Plsease input value
Plsease input value
