The maximum slewing diameter on the bed: Φ660 mm
The maximum slewing diameter in the saddle: Φ870 mm
Spindle bore diameter: Φ105 mm
Technical Parameters:
| project | unit | Model | |
| CS6266C | |||
| capacity | Maximum swing amplitude in bed | mm | Φ660 |
| Gap maximum swing | mm | Φ870 | |
| The effective length of the gap | mm | 240 | |
| Maximum swing | mm | Φ420 | |
| Maximum workpiece length | mm | 1000/1500/2000/3000 | |
| spindle | Spindle bore diameter | mm | Φ105 |
| Spindle nose end | ISO 702/Ⅱ No.8 cam-lock type | ||
| Spindle speed | r/min | 12 step 32-1600 | |
| Spindle motor | kW | 7.5 | |
| Tailstock | Sleeve diameter/stroke | mm | φ75/150 |
| Center taper | MT | 5 | |
| Knife | Number of tool positions/tool section | 4/25X25 | |
| Feed | Maximum X-axis travel | mm | 310 |
| Z-axis maximum travel | m/min | 145 | |
| X-axis feed | mm/r | 65 sorts 0.063-2.52 | |
| Z-axis feed | mm/r | 65 sorts 0.027-1.07 | |
| Metric threads | mm | 22 sorts 1-14 | |
| Inch threads | t.p.i | 25 sorts 28-2 | |
| Module threads | πmm | 18 sorts 0.5-7 | |
| DP thread | t.p.i. π | 24 sorts 56-4 | |
| other | Coolant pump motor | kW | 0.06 |
| Machine length | mm | 2632/3132/3632/4632 | |
| Machine width | mm | 975 | |
| Machine height | mm | 1270 | |
| Machine weight | kg | 2200/2400/2600/3000 | |
Product introduction:
1. It can be used for internal and external turning, taper turning, end turning and other rotary parts turning;
2. Turning all kinds of commonly used metric, imperial, modulus, and diameter threads;
3. Carry out drilling, reaming and oil pulling grooves, etc.;
4. It can also turn all kinds of flat and special-shaped parts;
5. Respectively with through-hole spindle holes, which can accommodate bars with larger diameters;
6. With metric or imperial feed system, suitable for regions and countries with different length measurement units;
7. There are handbrakes and foot brakes for users to choose;
8. Electrical system with different voltages (220V, 380V, 420V) and different frequencies (50Hz, 60Hz).
Standard configuration
Three-jaw chucks and flanges
Four-jaw chucks and flanges (for CS6266C)
Four-station turret
Dial
Faceplate (for CS6266C)
Steady rest Tool holder
LED Work Lights
Full-length bezel
Dead Centers and Centers Sets
Wrenches
Hook Wrenches
Fuel Guns
Optional Equipment
Live Centers
Random Buckle Disc
Mechanical Collision Stops
Quick Change Turret (American/Italian/European)
Chuck Protection
Turret protection,
taper die,
two-axis/three-axis digital display
Plsease input value
Plsease input value
