The maximum slewing diameter of the bed: Φ830 mm
Maximum slewing diameter on saddle: Φ540 mm
Spindle bore diameter: Φ105 mm
Technical Parameters:
| project | Name | unit | C6180A series |
| Processing range | Maximum swing diameter on the bed | mm | φ830 |
| Maximum swing diameter on the saddle | mm | φ540 | |
| The maximum distance between the two centers | mm | 1500/2000/3000/4000 | |
| Maximum workpiece turning length | mm | 1400/1900/2900/3900 | |
| Width of the bed rails | mm | 560 | |
| spindle | Spindle bore diameter | mm | φ105 |
| Spindle bore taper | 1:20 (metric taper) | ||
| Spindle head type | A1-11 | ||
| Spindle speed | r/min | Level 14 12.5-1120 | |
| Feed and thread | Maximum stroke of the upper turret | mm | 200 |
| Maximum stroke of the lower turret | mm | 515 | |
| Cutter cross-section | mm | 32×32 | |
| Lateral feed range | mm/r | 64 species 0.031-7.0 | |
| Longitudinal feed range | mm/r | 64 species 0.062-14.0 | |
| Metric thread range | mm | 38 species 0.5-56 | |
| Inch thread range | t.p.i | 43 species 56-0.5 | |
| Modular thread range | πmm | 21 species 0.25-7 | |
| Thread range of the diameter joint | DP | 27 species 56-4 | |
| Tailstock | Tailstock sleeve diameter | mm | φ100 |
| Tailstock sleeve maximum stroke | mm | 250 | |
| Tailstock sleeve bore taper (Mohs) | Mohs No.5 | ||
| Motor | Main motor power | kW | 11 |
| Cooling pump motor power | kW | 0.18 | |
| other | The length of the machine | mm | 3500/4000/5000/6000 |
| The width of the machine | mm | 1370 | |
| The height of the machine | mm | 1470 | |
| Total weight | kg | 4500/4800/5300/6100 |
Product Introduction:
It can be applied to all kinds of turning work, such as turning internal and external cylindrical surfaces, conical surfaces, and other rotary surfaces and end faces, and can also process a variety of commonly used threads - such as metric, imperial, modulus, diameter threads, as well as drilling, reaming, tapping, broaching trunking, etc.
Features:
1. It can be used for internal and external turning, taper turning, face turning and other rotary parts turning;
2. Turning all kinds of commonly used metric, imperial, modulus, and diameter threads;
3. Carry out drilling, reaming and oil pulling grooves, etc.;
4. It can also turn all kinds of flat and special-shaped parts
5. Respectively with through-hole spindle holes, which can accommodate larger diameter bars
6. With metric or imperial feed system, suitable for regions and countries with different length measurement units;
7. There are handbrakes and foot brakes for users to choose;
8. Electrical system with different voltages (220V, 380V, 420V) and different frequencies (50Hz, 60Hz).
Standard configuration
Three-jaw chucks and flanges
Four-jaw chucks and flanges (for C6180A)
Four-station turret
Dial
Faceplate (for C6180A)
Steady rest Tool holder
LED Work Light
Full-length bezel
Dead Centers and Centers Sets
Wrenches
Hook Wrenches
Fuel Guns
Optional Equipment
Live Centers
Random Buckle Disc
Mechanical Collision Stops
Quick Change Turret (American/Italian/European)
Chuck Protection
Turret protection,
taper die,
two-axis/three-axis digital display
Plsease input value
Plsease input value
