The maximum slewing diameter on the bed: Φ660 mm
Maximum slewing diameter on saddle: Φ400 mm
Spindle bore diameter: Φ105 mm
Technical Parameters:
| project | Name | unit | C6163B series |
| Processing range | Maximum swing diameter on the bed | mm | φ660 |
| Maximum swing diameter on the saddle | mm | φ400 | |
| The maximum distance between the two centers | mm | 1500/2000/3000/4000 | |
| Maximum workpiece turning length | mm | 1400/1900/2900/3900 | |
| Width of the bed rails | mm | 560 | |
| spindle | Spindle bore diameter | mm | φ105 |
| Spindle bore taper | 1:20 (metric taper) | ||
| Spindle head type | A1-11 | ||
| Spindle speed | r/min | Level 14 12.5-1120 | |
| Feed and thread | Maximum stroke of the upper turret | mm | 200 |
| Maximum stroke of the lower turret | mm | 480 | |
| Cutter cross-section | mm | 32×32 | |
| Lateral feed range | mm/r | 64 species 0.031-7.0 | |
| Longitudinal feed range | mm/r | 64 species 0.062-14.0 | |
| Metric thread range | mm | 38 species 0.5-56 | |
| Inch thread range | t.p.i | 43 species 56-0.5 | |
| Modular thread range | πmm | 21 species 0.25-7 | |
| Thread range of the diameter joint | DP | 27 species 56-4 | |
| Tailstock | Tailstock sleeve diameter | mm | φ100 |
| Tailstock sleeve maximum stroke | mm | 250 | |
| Tailstock sleeve bore taper (Mohs) | Mohs No.5 | ||
| Motor | Main motor power | kW | 11 |
| Cooling pump motor power | kW | 0.18 | |
| other | The length of the machine | mm | 3500/4000/5000/6000 |
| The width of the machine | mm | 1260 | |
| The height of the machine | mm | 1385 | |
| Total weight | kg | 4200/4500/5000/5800 |
Product Introduction:
1. It can be used for internal and external turning, taper turning, face turning and other rotary parts turning;
2. Turning all kinds of commonly used metric, imperial, modulus, and diameter threads;
3. Carry out drilling, reaming and oil pulling grooves, etc.;
4. It can also turn all kinds of flat and special-shaped parts;
5. Respectively with through-hole spindle holes, which can accommodate bars with larger diameters;
6. With metric or imperial feed system, suitable for regions and countries with different length measurement units;
7. There are handbrakes and foot brakes for users to choose;
8. Electrical system with different voltages (220V, 380V, 420V) and different frequencies (50Hz, 60Hz).
Standard configuration
Three-jaw chuck and flange
Four-jaw chucks and flanges (for CS6266C)
Four-station tool holder
Dial
Flower Plate (for CS6266C)
Steady rest
With the knife holder
LED work lights
Full-length bezel
Dead top and top set
wrench
Hook wrench
Oil gun
Optional equipment
Live tops
Random buckle plate
Mechanical stops
Quick change turret (American/Italian/European)
Chuck protection
Knife holder protection
Taper die
Two-axis/three-axis digital display
Plsease input value
Plsease input value
