Maximum slewing diameter on the bed: Φ460mm
The maximum processing diameter on the turret is Φ260mm
Surgical parameters:
| project | unit | specification | |
| Main parameters: | Maximum swing diameter on the bed | mm | Φ460 |
| Maximum machining diameter on turret | mm | Φ260 | |
| Maximum processing length | mm | 350 | |
| Spindle and chuck parameters | Spindle head type (chuck) | A2-5 (8 inches) | |
| Spindle motor power | kw | 7.5 | |
| Maximum spindle speed | rpm | 3500 | |
| Spindle bore diameter | mm | Φ56 | |
| Bar diameter | mm | Φ45 | |
| Feed section parameters | X/Z axis screw specifications | 3210/4010 | |
| X-axis limit travel | mm | 240 | |
| X-axis motor torque | N.M | 7.5 | |
| X/Z axis guideway specifications | mm | 35/35 | |
| Z-axis limit travel | mm | 400 | |
| Z-axis motor torque | N.M | 7.5 | |
| X, Z axis connection | Direct connection | ||
| Dota | Dota | Horizontal 8 stations | |
| Tailstock section | Sleeve diameter | mm | Φ70 |
| Sleeve stroke | mm | 80 | |
| Tailstock maximum travel | mm | 200 | |
| Tailstock sleeve taper | ＃ | Mohs 5 | |
| Form factor weight | Bed form and inclination | Monolithic/30° | |
| Length*width*height | mm | 2500x1700x1890 | |
| Heavy (about heavy) | kg | 3000 | |
Machine description: This machine tool is a high-speed, high-precision, high-reliability inclined bed machine tool. The main components such as the bed frame, bed and headstock are cast with high-strength materials to ensure the long-term stability of the machine tool.
The machine adopts a 45° integral inclined bed structure, equipped with high-precision preloaded Taiwan linear rolling guide. The servo motor is connected directly to the screw rod by means of a high-torque, low-inertia elastic coupling. The screw rod support adopts a pre-stretching structure, which can eliminate the transmission backlash, and pre-compensate for the influence of thermal deformation on the accuracy during the long-term operation of the machine tool to ensure the positioning accuracy and repeated positioning accuracy; The machine tool has high positioning accuracy and smooth chip removal, which is suitable for high-speed and high-precision machining.
The use of high-speed, high-precision, high-rigidity cassette spindle unit and servo spindle motor can achieve higher spindle speed. The spindle unit is assembled in a thermostatic chamber. After assembly, it runs at a constant temperature for 72 hours, and then runs continuously on the machine for 72 hours to ensure the reliability of high-speed and high-precision performance.
The arrangement method is adopted, the tool change speed is fast, and the positioning accuracy is high.
Plsease input value
Plsease input value
