Maximum drilling diameter : 125 mm
Table size: 800×1250 mm
Technical Parameters:
| specification | unit | Z30125×40 |
| Maximum diameter of the borehole | millimetre | 125 |
| The distance from the spindle end face to the work surface | millimetre | 750-2500 |
| The distance from the center of the spindle to the column busbar | millimetre | 600-4000 |
| Spindle travel | millimetre | 560 |
| Spindle taper | metric ton | Metric 80 |
| Spindle speed range | rotate speed | 6.3-800 |
| The number of spindle speed stages | – | 22 |
| Spindle feed range | mm/rev | 0.06-3.20 |
| The number of spindle feed levels | – | 16 |
| Swingarm rotation angle | ±180° | |
| Main motor power | kw | 18.5 |
| Machine weight | kg | 28500 |
| Dimensions | millimetre | 4960x2000x4780 |
Radial drilling machine, also known as cross-arm drilling. A drilling machine where the headstock can move left and right on the rocker arm and rotate around the column with the rocker arm. It is often used in machine building and repair plants to process holes for small and medium-sized workpieces.
1. Z30125×40 hydraulic radial drilling machine is a universal general machine tool. The maximum drilling diameter of the machine is ¢100 m (¢100 mm on steel with 50-60 kgf/mm and cast iron with Brinell hardness HB=200)
2. In addition to drilling, this machine tool can also be used for reaming, drilling countersunk holes, countersink faces, reaming, tapping, etc.
3. This machine tool has high efficiency, good rigidity, high precision, low noise and wide speed range.
4. Centralized operation, novel appearance, easy to use and maintain, suitable for repair tools and other single-piece small batch production workshop, if equipped with drill fixtures, also suitable for batch production workshop.
The main performance characteristics of the product:
the hydraulic pre-selection transmission mechanism is adopted, which can save auxiliary time.
The spindle forward and reverse, stop (brake), shift, neutral gear and other actions are controlled with a handle, and the operation is light.
The headstock, rocker arm, inner and outer columns are clamped by hydraulically driven diamond-shaped blocks, which are clamped reliably.
The rocker guide rail, the outer cylinder round surface, the spindle, the spindle sleeve and the inner and outer column rotary raceways have been quenched, which can maintain the stability of the machine tool accuracy for a long time and prolong the service time.
There are perfect safety protection devices and outer pillar protection.
In terms of structural design and in the manufacturing process, a series of effective measures have also been taken to make the accuracy durability of the machine tool and the service life of the whole machine greatly extended.
Standard equipment
Radial drilling machine
deceleration sleeve
unsleeve, wedge
drill chuck
workbench
unloader, wrench
anchor bolt
LED work light
adjustment pad
operation manual
certificate
Packing list
Plsease input value
Plsease input value
