The maximum slewing diameter on the bed: Φ660 mm
The maximum slewing diameter in the saddle: Φ870 mm
Spindle bore diameter: Φ82mm
Technical Parameters:
| project | unit | range | ||
| CS6166B | CS6266B | |||
| Processing range | Maximum swing diameter on the bed | millimetre | Φ660 | |
| Maximum swing diameter in the saddle | millimetre | Φ870 | ||
| Effective length in the saddle | millimetre | 240 | ||
| Maximum swing diameter on the saddle | millimetre | Φ420 | ||
| Maximum workpiece length | millimetre | 1000/1500/2000/3000 | ||
| Bed width | millimetre | 390 | ||
| spindle | Spindle bore diameter | millimetre | Φ82 | |
| Spindle head type | ISO 702/II. No.8 Cam Locking Type | |||
| Spindle speed | Revolutions/min | Level 24 9-1600 | ||
| Spindle motor power | kw | 7.5 | ||
| Tailstock | Sleeve diameter/stroke | millimetre | φ75/150 | |
| Tip taper | MT | 5 | ||
| Knife | Number of tool positions/tool size | 4/25X25 | ||
| Feed and thread | Maximum stroke of the upper turret | millimetre | 145 | |
| Maximum stroke of the lower turret | m/min | 320 | ||
| X-axis feed | mm/rev | 93 species 0.012-2.73 | ||
| Z-axis feed Z-axis feed | mm/rev | 93 species 0.028-6.43 | ||
| Metric threads | millimetre | 48 species 0.5-224 | ||
| Inch threads | tpi | 48 species 72-1/8 | ||
| Modular threads | π mm | 42 species 0.5-112 | ||
| Diameter threads | DP | 42 species 56-1/4 | ||
| other | Cooling pump motor power | kw | 0.06 | |
| The length of the machine | millimetre | 2632/3132/3632/4632 | ||
| The width of the machine | millimetre | 1050 | ||
| The height of the machine | millimetre | 1350 | ||
| Machine weight | kg | 2400/2600/2800/3000 | ||
Product Introduction:
1. It can be used for internal and external turning, taper turning, face turning and other rotary parts turning;
2. Turning all kinds of commonly used metric, imperial, modulus, and diameter threads;
3. Carry out drilling, reaming and oil pulling grooves, etc.;
4. It can also turn all kinds of flat and special-shaped parts;
5. Respectively with through-hole spindle holes, which can accommodate bars with larger diameters;
6. With metric or imperial feed system, suitable for regions and countries with different length measurement units;
7. There are handbrakes and foot brakes for users to choose;
8. Electrical system with different voltages (220V, 380V, 420V) and different frequencies (50Hz, 60Hz).
Standard configuration
Three-jaw chucks and flanges
Four-jaw chucks and flanges (for CS6266B)
Four-station turret
Dial
Faceplate (for CS6266B)
Steady rest
Tool holder
LED Work Lights
Full-length bezel
Dead Centers and Centers Sets
Wrenches
Hook Wrenches
Fuel Guns
Optional Equipment
Live Centers
Random Buckle Disc
Mechanical Collision Stops
Quick Change Turret (American/Italian/European)
Chuck Protection
Turret protection,
taper die,
two-axis/three-axis digital display
Plsease input value
Plsease input value
