Maximum slewing diameter on the bed: Φ520mm
The maximum rotation diameter of the transverse slide plate: Φ220mm
Technical Parameters:
| project | unit | parameter | |
| Main parameters: | Maximum swing diameter on the bed | mm | Φ520 |
| The maximum rotation diameter of the transverse slide | mm | Φ220 | |
| Maximum processing length | mm | 410 (Row Tool) /310 (Turret) | |
| X-axis maximum travel | mm | 500 | |
| Maximum travel in the Z-axis | mm | 500 | |
| Spindle motor power | KW | 5.5 servo | |
| Spindle parameters | Maximum spindle speed | rpm | 3000rpm |
| Clamping form | Hydraulic chucks/chucks | ||
| Number of spindle speed stages | Infinitely variable speed | ||
| Spindle end code | A2-6 | ||
| Spindle bore diameter | mm | Φ66 | |
| Inner diameter of the spindle drawn tube | mm | Φ55 | |
| Feed section parameters | Rapid traverse speed | m/min | X:24 Z:24 |
| Cutting feed rate | mm/min | 1-15000 | |
| X/Z motor torque | Nm | 7.5/7.5 | |
| Cross-section of the shank | 25×25 | ||
| Knife | mm | Platoon/turret | |
| X/Z repeatability | mm | ±0.003 | |
| Form factor weight | Dimensions (LxWxH) | L | 2500x1620x1890 |
| Bed form and inclination | Monolithic/45 degrees | ||
| The weight of the whole machine | mm | 3000 | |
Machine description: This machine tool is a high-speed, high-precision, high-reliability inclined bed machine tool. The main components such as the bed frame, bed and headstock are cast with high-strength materials to ensure the long-term stability of the machine tool.
The machine adopts a 45° integral inclined bed structure, equipped with high-precision preloaded Taiwan linear rolling guide. The servo motor is connected directly to the screw rod by means of a high-torque, low-inertia elastic coupling. The screw rod support adopts a pre-stretching structure, which can eliminate the transmission backlash, and pre-compensate for the influence of thermal deformation on the accuracy during the long-term operation of the machine tool to ensure the positioning accuracy and repeated positioning accuracy; The machine tool has high positioning accuracy and smooth chip removal, which is suitable for high-speed and high-precision machining.
The use of high-speed, high-precision, high-rigidity cassette spindle unit and servo spindle motor can achieve higher spindle speed. The spindle unit is assembled in a thermostatic chamber. After assembly, it runs at a constant temperature for 72 hours, and then runs continuously on the machine for 72 hours to ensure the reliability of high-speed and high-precision performance.
The arrangement method is adopted, the tool change speed is fast, and the positioning accuracy is high.
Plsease input value
Plsease input value
