Table size: 1370x300mm
The maximum load of the workbench is 300kg
Technical parameters:
| Model | X6230 | X6230A | X6230B | X6230C |
| Work area | ||||
| Table size (L×W) | 1270x300mm | 1370x300mm | 1270x300mm | 1370x300mm |
| T-slot (number of slots x slot width x slot spacing) | 3x14x80mm | |||
| The maximum load capacity of the workbench | 300 kg | |||
| Rotation angle | Range: ±45° | |||
| The distance from the spindle end to the table | 100-500mm | |||
| itinerary | ||||
| Longitudinal stroke of the table (X) | 720mm | 820mm | 900mm | 1000mm |
| Table transverse travel (Y) | 300mm (280mm if there is a digital display) | 380mm (360mm if there is a digital display) | ||
| Table vertical travel (Z) | 400mm | |||
| spindle | ||||
| Spindle speed range | Level 11; 45-1660rpm | |||
| Spindle taper | 7:24，ISO40 | |||
| Main drive motor power | 3 kilowatts | |||
| Milling head rotation angle | ±360° | |||
| Feed | ||||
| Rapid traverse rate (X/Y/Z) | 1335/1335/1000mm/min | |||
| Feed range (X/Y) | 30-830mm/min | |||
| Feed range (Z) | 23-625mm/min | |||
| other | ||||
| Machine dimensions (L×W×H) | 1730x1760x1700 mm | 1830x1760x1700 mm | 1730x1760x1700 mm | 1830x1760x1700 mm |
| net weight | 1800 kg | 1850 kg | 1850 kg | 1900 kg |
Equipment introductionX6230
series rotary head milling machine is a mature product mainly exported by ANTISHICNC. The whole machine has a compact structure and a beautiful appearance. It is suitable for drilling, reaming, reaming, beveling, tapping, plane milling, step plane, slope, slot milling, cutting milling curves, surfaces, cams. With stepless speed regulation and automatic speed change, it obtains high torque at low speeds, and is suitable for machining thicker cutting depths and larger diameter holes. The fuselage and main components are made of high-strength cast iron, and the microstructure is stable to ensure the stability of the machine tool for long-term use.
Product Details
• The vertical head can rotate 360°, and the rotary head can be converted
between vertical and horizontal milling modes• The spindle is directly driven by the gearbox, and the milling is powerful
• The table feed is driven by servo motor, which has high precision, low noise, and easy operation. One rod can select the table feed direction
• Simple design of the control panel for easy operation (optional DRO)
Standard Equipment:
Spindle Bore Taper ISO40-27
8 Milling Chucks
5 Inch Vise
Tie Rod
Lift Crank
Work Light
Cooling System
Tools & Toolbox
Operator's Manual
Optional accessories: (at additional cost)
3-axis digital display system
, indexing head, 100mm (manual),
rotary table
, 6" vise
, 15 milling chucks
, 58 clamping kits
, newly designed aluminium
cantilever spindle guard
Workbench Protective Cover
: LED Work Light:
Automatic concentrated oil lubrication
of Schneider electrical components
Plsease input value
Plsease input value
