Maximum workpiece size: 3000X1600mm
Technical Parameters:
| project | parameter | |
| Maximum workpiece size | Length x width | 3000X1600mm |
| Maximum plate thickness | 100mm | |
| Vertical pillow power spindle | quantity | 1 |
| Spindle taper | BT50 | |
| Maximum borehole diameter | Φ50mm | |
| Drilling depth | ≤100 | |
| Spindle speed | 30-3000 rpm | |
| Spindle motor power | 22 kilowatts | |
| The distance between the lower end of the spindle and the work surface | 200-500mm | |
| Longitudinal movement of gantry (X-axis) | Maximum stroke | 3000mm |
| X-axis movement speed | 0-10 m/min | |
| X-axis servo motor power | 2.0 kW | |
| Power head lateral movement (Y-axis) | Maximum stroke of the power head | 1600mm |
| Y-axis movement speed | 0-10 m/min | |
| Y-axis servo motor power | 1.5kW | |
| Vertical sliding sleeper feed motion (Z-axis) | Z-axis travel | 300mm |
| Z-axis feed speed | 0-5 m/min | |
| Z-axis servo motor power | 2.0 kW | |
| Positioning accuracy | X-axis | 0.1mm/full length |
| Y-axis | 0.1mm/full length | |
| Repositioning accuracy | X-axis | 0.05mm |
| Y-axis | 0.05mm | |
| Hydraulics | Hydraulic pump pressure | 6MPa |
| Hydraulic pump motor power | 2.2 kW | |
| Pneumatic system | Compressed air supply pressure | ≥0.5MPa |
| Chip evacuation and cooling | Chip evacuation type | Chain plate type |
| Number of chip conveyors | 1 | |
| Chip evacuation speed | 1 m/min | |
| Chip removal motor power | 0.43kW | |
| Internal cooling + external cooling | ||
| Automatic lubrication system | Lubrication pressure | 2MPa |
| Lubrication point oiling | 0.1 ml | |
| Lubrication intervals | 6-10 minutes | |
| Electronic systems | Numerical control system | Siemens PLC |
| Number of NC axes | 3 | |
| Total motor power | Approx. 30 kW | |
| Dimensions | Length x Width x Height | ABOUT 5.5X3.9X3.2 METERS |
Applicable industries:
Mainly used in petrochemical, boiler, wind power, flange and other industries of drilled tube sheets, partitions, flanges, large plates, can also be used in buildings, bridges, heat exchange, towers and other industries of connecting plates.
Features:
1. Both sides of the bed are respectively equipped with heavy-duty linear roller guide pairs. The longitudinal movement on both sides of the gantry is synchronously driven by AC servo motors and large pitch precision ball screw pairs.
2. There are two movable slides on the gantry beam. The slide is guided by two pairs of linear roller guides, which are respectively driven by an AC servo motor and a large pitch precision ball screw pair.
3. The slide table on the beam is equipped with a vertical CNC feed ram drilling spindle, and the spindle adopts a heavy-duty special frequency conversion motor. The motor drives the spindle via a timing belt. The drill shaft adopts Taiwan precision spindle (internal coolant), disc spring automatic broaching mechanism, hydraulic cylinder loose knife, and easy to change the tool handle.
4. This machine is equipped with a hydraulic system to complete the hydraulic balance of the vertical ram and the hydraulic loosening of the spindle.
5. Siemens numerical control system, equipped with RS232 interface and LCD screen. The automatic programming provided not only automatically generates the machining program, but also previews the hole position before drilling.
6. Equipped with chain plate automatic chip conveyor and chip collection trolley. The cooling system is equipped with a paper filter, a high-pressure internal coolant pump and a low-pressure external coolant pump for internal or external cooling of the tool.
Plsease input value
Plsease input value
